NetworkSims Demo Page
Current demos are:
CCNA Challenge 1 [Click
here - D1]. In this demo the basic details
of the E0 port are defined, such as for its IP address,
subnet mask, status, description, and so on. Each
time the challenge is run it gives a new set of challenge
parameters.
CCNP ONT Challenge [Click
here - D19]. UNIQUE FEATURE! The new
CCNP certification related to ONT (Optimizing Converged
Networks - 642-845) has just been released. Networksims
contains a full coverage of the practical studies
for this new certification. This demo covers the configuration
of WRED. The full version covers lots of interesting
areas, such as queuing, QoS, and so on.
CCNP ISCW Challenge [Click
here - D18]. UNIQUE FEATURE! The new
CCNP certification related to ISCW (Implementing Secure
Converged Wide-Area Networks - 642-825) has just been
released. Networksims contains a full coverage of
the practical studies for this new certification.
This demo covers the configuration of cryptolists.
The full version covers lots of interesting areas,
such as crypto functions, IPS, and so on.
Exercises
[Click here
- D2]. In this demo there are three routers,
in a ring topology. It involves defining the key details
on each of the devices, such as their IP address and
routing protocol, such that, at the end, the devices
should be able to communicate with each other. A key
factor is that they should be able to ping each other
once the details have been set. Each time the challenge
is run it gives a new set of challenge parameters,
each of which should work.
Topology [Click
here - D3]. This demo relates to the
topology option in which there are four routers, in
a ring topology with a backup route. The topology
allows the user to practice their configurations.
There are no details defined devices, and the user
can enter whichever details are required.
Set Complete [Click
here - D4]. This demo relates to the
Set Complete option, using Topology 4, in which
there are three routers in a star formation, and three
hosts. It creates a completed setup, so that the user
can debug using ping and tracert to determine if the
system is working correctly.
CCNP (Adv Routing/BSCI) [Click
here - D5]. This demo relates to the
first challenge of the CCNP BSCI certification in
which a DHCP pool is setup on the device. Each time
the challenge is run it gives a new set of challenge
parameters.
Fault-finding [Click
here - D6]. UNIQUE FEATURE! This demo
relates to the fault-finding challenges, where a random
fault is placed on a defined topology, and the user
must find it. If required the solution can be shown
at any time. Each time the challenge is run it gives
a new set of challenge parameters. Other faults are
at:
Switch
challenge [Click
here - D9]. In this demo involves setting
up basic details on the Ethernet ports on the switch,
and also defining CDP. Each time the challenge is
run it gives a new set of challenge parameters. The
switch supports both Layer 2 and Layer 3 activities.
Security challenge [Click
here
- D11]. The simulators follow the CCSP
certification, along with challenges that are useful
in day-to-day activities. These challenges relate
to security for routers, firewalls, and switches.
Host challenge [Click
here - D10]. This demo shows the configuration
of a Windows host for it's network details, and for
the testing of the details with IPCONFIG and IPCONFIG/ALL.
Each time the challenge is run it gives a new set
of challenge parameters.
Cisco
CCVP Simulator [Click
here - R12]. In this demo a POTs and
a VoIP dial-peer are setup, and includes a destination-pattern
to match and a preference. Other demos include:
